Follow us :

Hot dip galvanized strip equipment should pay attention to the demolition of the matter

time2018/02/06

1, the first power outage, stop oil, disassemble the pipe fittings, protect well on the safe place.
2, the pressure roller is in the open position and insert the safety pin, in order to prevent the pressure roller from falling freely.
3, remove the drum fan, remember to lift the car up and down to the reel, the fan to be demolished demolition block attached to the ends of the fan plate, the sub-sector can be tilted along the groove slot Out
4, to overhaul reel shaft bearings, the need to loosen the bolts at both ends of the bearing gland, remove the bearing caps at both ends, remove the pressure roller to release the upper and lower box connection bolts, open the lid